Ceramic Fiber Modules
Product Applications:
  • High gas flow velocity furnace or duct lining
  • Direct exposure to heat as furnace hot face lining
  • Continuous heating furnace for rolling
  • Well-type heat-treatment furnace, bench-type annealing
    furnace casing-type furnace
  • Shuttle-type kiln for sintering potteries
  • Tunnel furnace in architectural industry
Product Features:
  • Low density and low thermal conductivity
  • To be secured by concealed anchor
  • Greater mechanical strength
  • Shorter heat up and cool down time
  • Resilience and resistance to thermal shock
  • Flexible and easy to cut or install
  • Asbestos free
Physical Properties and Dimensions
Physical Properties/Product Item
 
HP Ceramic Fiber Module
LZ Ceramic Fiber
Module
HZ Ceramic Fiber
Module
Product Catalog No.
 
SDRN-389
SDRN-689
SDRN-589
Temperature
Classification (ºC)
1260
1430
Chemical Composition(%)
Al2O3
47-49
47-51
39-40
SiO2
50-52
44-46
44-45
ZrO2
 
4-5
15-17
Dimensions (mm)
Module: 300 (L) × 300 (w);  400 (L)  x 400 (W)
Module thickness from 70 mm to 300 mm
Diameter of Fiber (µm)
3–4.5
HP ceramic fiber module    SDRN-389
LZ ceramic fiber module     SDRN-689
HZ ceramic fiber module     SDRN-589
Ceramic Fiber Module is made of ceramic fiber
blanket fan folded, or pre-cut blanket stack bonded
to form a module, to form a module with cut edges
exposed. The available combinations of blanket
grades, densities, and sizes allow these modules to
be used in many different types of industrial
furnaces. The modules are held to the steel casing
by stainless steel studs that are pre-welded to the
furnace shell. Customers should check the which
type of module is best fit according individual
furnace structure, operating temperature, and
furnace surroundings.